M-08R CHASSIS KIT
kr3999
På lager
M-08R er et high-performance chassis fullspekket med oppgraderingsdeler fra Hop-up og TRF serien. Leveres fullt utstyrt med blant annet kulelagre og oljefylte Big Bore M-Chassis dempere, for å nevne noe.
M-08 chassiset kan valgfritt monteres sammen med 225mm (M) eller 239mm (L) hjulbase.
Må kompletteres med:
- Radio og mottaker
- Servo (low profile)
- Fartskontroller
- Motor (540 størrelse)
- NiMH eller LiPO batteri
- Batterilader
- Karosseri (M-chassis)
- PS lakk
Fra produsenten:
Length: 305-334mm. Image shows assembled kit.
| RWD Racer The M-08R adds a plethora of race-spec parts to the balanced, compact RWD M-08 Concept chassis: an example being the hopped-up drivetrain with a ball differential, universal shafts featuring low-friction cross joints and lightweight aluminum swing shafts, plus 5mm wheel hubs. Turnbuckle shaft suspension arm and steering setup components simplify fine-tuning of the M-08R, and titanium-coated shafts are a durable inclusion in the kit. Carbon fiber damper stays are paired with M-Chassis big bore aluminum dampers+ featuring dedicated blue anodized top and bottom caps for a touch of class, while a 20-gram ballast weight is included to get the chassis feeling just how you want it to. |
 ★Turnbuckle shafts in the steering can be rotated to fine-tune setup. A hi-torque servo saver is included in the kit as standard. |
 ★High performance M-chassis aluminum big bore dampers+ are included, and feature blue anodized top and bottom caps for a classy look. |
 ★Upper arms are also a turnbuckle shaft design. Clamp type wheel hubs (5mm) and reinforced freewheel axles are also in the box. |
 ★Battery holders are crafted in 3mm thickness carbon fiber material. Use the provided sponge tape as necessary to ensure snug battery fit. |
 ★A midship motor powers the rear wheels. The sealed rear gearbox houses a ball differential for limited-slip diff effect. |
 ★This image goes close-up on the double wishbone rear suspension. Note the carbon fiber damper stay for the big bore aluminum dampers. |
 |
 |
★Left: Universal drive shafts employ lightweight 33mm aluminum swing shaft and cross joint for LF assembly type universal shafts.
★Right: Long suspension arms help the M-08R to maintain a stance low to the ground. A urethane bumper is included in the kit. |
| Featured Components Drivetrain: ●Full ball bearings ●Ball differential (52T) ●33mm lightweight aluminum swing shafts ●Cross joint for LF assembly type universal shafts ●06 module fluorine coated 20T pinion gear ●M-08 Concept aluminum shafts ●M-Chassis reinforced freewheel axles ●5mm clamp-type wheel hubs Suspension: ●Carbon fiber damper stays (front/rear) ●Reinforced D parts (suspension arms) ●Aluminum turnbuckle shafts ●Titanium coated suspension shafts ●5x5mm, 5x11mm hard hex head ball connectors ●M-Chassis big bore aluminum dampers+ ●3x 1.3mm-hole pistons ●4mm aluminum serrated wheel nuts (blue) ●5mm reinforced open face adjusters Chassis: ●Carbon fiber battery holder ●Carbon fiber body mount base ●Reinforced K parts (gearbox) ●Chassis balance weight (20g) ●Hi-torque servo saver ●Aluminum ball connectors (blue) ●Hex head screws |
| Included Parts | Included Parts |
| Item 54306 TA06 Rear Ball Differential Set (52T) | Item 54969 33mm Lightweight Aluminum Swing Shafts (2pcs.) |
| Item 42357 Cross Joints for Low Friction Assembly Universal Shafts | Item 53509 Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T/F201) |
| Item 54906 M-08 Concept Aluminum Shaft Set | Item 54183 M-Chassis Reinforced Freewheel Axle Set |
| Item 53823 Clamp Type Aluminum Wheel Hub (5mm Thick) | Item 54908 M-08 Concept Carbon Body Mount Base |
| Item 54983 M-08 Concept Reinforced K Parts (Gearbox) | Item 51000 Hi-Torque Servo Saver (Black) |
| Item 53642 5mm Aluminum Ball Connector (Blue) | Item 54811 M-07 Concept Reinforced D Parts (Suspension Arms) 2pcs. |
| Item 54247 3x18mm Aluminum Turnbuckle Shaft (2pcs.) | Item 54248 3x23mm Aluminum Turnbuckle Shaft (2pcs.) |
| Item 53851 46mm Titanium Coated Suspension Shafts 2pcs. | Item 53917 2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension |
| Item 54249 3x32mm Aluminum Turnbuckle Shaft (2pcs.) | Item 53968 5x5mm Hard Hex Head Ball Head Connector (5pcs.) |
| Item 54889 M-08 Concept Carbon Damper Stay (Front) | Item 54890 M-08 Concept Carbon Damper Stay (Rear) |
| Item 42355 M-Chassis Aluminum Big Bore Dampers+ (4pcs.) | Item 42143 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) |
| Item 54868 Open Face 5mm Reinforced Adjusters (Medium/8pcs.) | Item 54869 Open Face 5mm Reinforced Adjusters (Long/8pcs.) |
| Specifications ★Length: 319mm (with 225mm wheelbase), width: 165mm ★Alterable wheelbase: 210mm, 225mm, 239mm ★Monocoque frame with separate front and rear sections ★Midship motor, rear-wheel drive ★Ball differential ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★M-Chassis big bore aluminum dampers+ ★Gear ratio = 5.776:1 (using kit 20T pinion); 8 ratios between 6.795:1 and 4.813:1 are possible with separately sold pinions) ★Electronic speed controller (ESC) is sold separately. |
| Separately Required Items ★Body ★Type 540 motor (brushless is recommended) ★Tires ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger |
Information is current as of March 14, 2022. Specifications are subject to change without notice.
| Chassis | M-08R |
|---|---|
| Drift | 2WD |
| Drivkraft | ELEKTRO |
| Leveres som | KIT |
| Merke | TAMIYA |
