RC byggesett av Landfreeder Quadtrack med belter som gir en helt ny RC opplevelse.
TT-02FT chassiset er en variant av TT-02 chassiset med belter, dette gir helt nye muligheter i forhold til å kjøre i terrenget. I tillegg til at TT-02 er en ideell plattform å starte på, kan RC-byggere utvide sitt potensial ved å legge til mange oppgraderingsdeler som er tilgjengelige for å øke bilens hastighet og ytelse. Modellen leveres med en kraftig CR-Tuned børstemotor (35T), polykarbonat deksel for å beskytte elektronikken og deler av mekanikken, lakkert sort lexan karosseri.
Behøves utenom som ikke er inkludert:
2-kanals fjernkontroll og mottaker
7.2V Ni-Mh batteripakke og lader
Styreservo
ESC
AA Batterier til radio
Spesifikasjoner:
Byggesett
Chassis type: TT-02FT
Skala: 1/10
Lengde: 42,5 cm
Bredde: 24,7 cm
Høyde: 19,9 cm
Terreng: Off-road
Drift: 4WD firehjulsdrift belter
Fartsregulator: F. eks TBLE-04S som passer til både børste og børsteløsmotor (PS. ikke inkludert)
Batteripakke: 7,2V Ni-Mh eller en 7.4V Lipo pakke (Round case) med Tamiya-kontakt (ikke inkludert)
Motor: CR-Tuned børstemotor 35T (inkludert)
Body: Lakkert polykarbonat svart (PS-5) og vinduene med smoke (PS-31)
Anbefales:
- Kulelagre: 64stk 850 (5x8x2.5), 8stk 1050 (5x10x4), 12stk 1150 (5x11x4), 8stk 1280 (8x12x3.5)
Fra produsenten:
Length: 425mm. Image shows painted and assembled kit.
On the Right Track This assembly kit creates an R/C model off-road truck which shows high performance on poor surfaces. Its chassis is based upon the TT-02 shaft-driven 4WD unit, with superlative traction from its four individual tracks that helps it plow through snow, sand, mud and other testing conditions. Its 1980s pick-up truck style body is molded in polycarbonate, with fog lamps, grille guard and roll bar recreated using separate metal-plated parts. A polycarbonate chassis cover and wheel well liners help prevent dirt and the like from getting into the chassis and potentially causing damage. |
Tracked 4WD Fun: the TT-02FT Chassis The TT-02FT chassis uses the shaft-driven TT-02 as a base, with track units in place of the four wheels. Each of the track units is attached to upper and lower suspension arms, and is powered via a drive sprocket that attached to the chassis drive shaft; they swing to allow superior contact with the running surface, and feature a sprung roller to allow easier negotiation of smaller obstacles. Plenty of ground clearance is on offer, too. Tracks are a plastic assembly type design with metal link pins, and give minimal power loss from friction for a smooth drive, even at lower speeds. Two types of link are included in the kit – standard, and jutting grouser designs – and can be used in tandem to customize your model’s grip. The chassis features a CR-Tuned motor as standard. |
Specifications ★Length: 425mm, width: 247mm, height: 199mm ★Wheelbase: 251mm ★Surface contact: 60mm/track ★Track width: 39mm ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel resin differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★CR-Tuned motor ★Electronic Speed Controller (ESC) is sold separately. |
Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger |
Information is current as of June 29, 2021. Specifications are subject to change without notice.